- Categories
- Education and Communications
- Studying
- Mathematics
- Probability and Statistics
Download Article
Explore this Article
Steps
Steps
Other Sections
Video
Tips and Warnings
Related Articles
References
Article Summary
Co-authored byMario Banuelos, PhD
Last Updated: March 3, 2024Fact Checked
Download Article
P value is a statistical measure that helps scientists determine whether or not their hypotheses are correct. P values are used to determine whether the results of their experiment are within the normal range of values for the events being observed. Usually, if the P value of a data set is below a certain pre-determined amount (like, for instance, 0.05), scientists will reject the "null hypothesis" of their experiment - in other words, they'll rule out the hypothesis that the variables of their experiment had no meaningful effect on the results. Today, p values are usually found on a reference table by first calculating a chi square value.
Steps
Download Article
1
Determine your experiment's expected results. Usually, when scientists conduct an experiment and observe the results, they have an idea of what "normal" or "typical" results will look like beforehand. This can be based on past experimental results, trusted sets of observational data, scientific literature, and/or other sources. For your experiment, determine your expected results and express them as a number.[1]
- Example: Let's say prior studies have shown that, nationally, speeding tickets are given more often to red cars than they are to blue cars. Let's say the average results nationally show a 2:1 preference for red cars. We want to find out whether or not the police in our town also demonstrate this bias by analyzing speeding tickets given by our town's police. If we take a random pool of 150 speeding tickets given to either red or blue cars in our town, we would expect 100 to be for red cars and 50 to be for blue cars if our town's police force gives tickets according to the national bias.
2
Determine your experiment's observed results. Now that you've determined your expected values, you can conduct your experiment and find your actual (or "observed") values. Again, express these results as numbers. If we manipulate some experimental condition and the observed results differ from this expected results, two possibilities are possible: either this happened by chance, or our manipulation of experimental variables caused the difference. The purpose of finding a p-value is basically to determine whether the observed results differ from the expected results to such a degree that the "null hypothesis" - the hypothesis that there is no relationship between the experimental variable(s) and the observed results - is unlikely enough to reject.[2]
- Example: Let's say that, in our town, we randomly selected 150 speeding tickets which were given to either red or blue cars. We found that 90 tickets were for red cars and 60 were for blue cars. These differ from our expected results of 100 and 50, respectively. Did our experimental manipulation (in this case, changing the source of our data from a national one to a local one) cause this change in results, or are our town's police as biased as the national average suggests, and we're just observing a chance variation? A p value will help us determine this.
Advertisem*nt
3
Determine your experiment's degrees of freedom. Degrees of freedom are a measure the amount of variability involved in the research, which is determined by the number of categories you are examining. The equation for degrees of freedom is Degrees of freedom = n-1, where "n" is the number of categories or variables being analyzed in your experiment.[3]
- Example: Our experiment has two categories of results: one for red cars and one for blue cars. Thus, in our experiment, we have 2-1 = 1 degree of freedom. If we had compared red, blue, and green cars, we would have 2 degrees of freedom, and so on.
4
Compare expected results to observed results with chi square. Chi square(written "x2") is a numerical value that measures the difference between an experiment's expected and observed values. The equation for chi square is: x2 = Σ((o-e)2/e), where "o" is the observed value and "e" is the expected value.[4] Sum the results of this equation for all possible outcomes (see below).
- Note that this equation includes a Σ (sigma) operator. In other words, you'll need to calculate ((|o-e|-.05)2/e) for each possible outcome, then add the results to get your chi square value. In our example, we have two outcomes - either the car that received a ticket is red or blue. Thus, we would calculate ((o-e)2/e) twice - once for red cars and once for blue cars.
- Example: Let's plug our expected and observed values into the equation x2 = Σ((o-e)2/e). Keep in mind that, because of the sigma operator, we'll need to perform ((o-e)2/e) twice - once for red cars and once for blue cars. Our work would go as follows:
- x2 = ((90-100)2/100) + (60-50)2/50)
- x2 = ((-10)2/100) + (10)2/50)
- x2 = (100/100) + (100/50) = 1 + 2 = 3 .
5
Choose a significance level. Now that we know our experiment's degrees of freedom and our chi square value, there's just one last thing we need to do before we can find our p value - we need to decide on a significance level. Basically, the significance level is a measure of how certain we want to be about our results - low significance values correspond to a low probability that the experimental results happened by chance, and vice versa. Significance levels are written as a decimal (such as 0.01), which corresponds to the percent chance that random sampling would produce a difference as large as the one you observed if there was no underlying difference in the populations.[5]
- It is a common misconception that p=0.01 means that there is a 99% chance that the results were caused by the scientist's manipulation of experimental variables.[6] This is NOT the case. If you wore your lucky pants on seven different days and the stock market went up every one of those days, you would have p<0.01, but you would still be well-justified in believing that the result had been generated by chance rather than by a connection between the market and your pants.
- By convention, scientists usually set the significance value for their experiments at 0.05, or 5 percent.[7] This means that experimental results that meet this significance level have, at most, a 5% chance of being reproduced in a random sampling process. For most experiments, generating results that are that unlikely to be produced by a random sampling process is seen as "successfully" showing a correlation between the change in the experimental variable and the observed effect.
- Example: For our red and blue car example, let's follow scientific convention and set our significance level at 0.05.
6
Use a chi square distribution table to approximate your p-value.[8] Scientists and statisticians use large tables of values to calculate the p value for their experiment. These tables are generally set up with the vertical axis on the left corresponding to degrees of freedom and the horizontal axis on the top corresponding to p-value. Use these tables by first finding your degrees of freedom, then reading that row across from the left to the right until you find the first value bigger than your chi square value. Look at the corresponding p value at the top of the column - your p value is between this value and the next-largest value (the one immediately to the left of it).
- Chi square distribution tables are available from a variety of sources - they can easily be found online or in science and statistics textbooks. If you don't have one handy, use the one in the photo above or a free online table, like the one provided by medcalc.org here.
- Example: Our chi-square was 3. So, let's use the chi square distribution table in the photo above to find an approximate p value. Since we know our experiment has only 1 degree of freedom, we'll start in the highest row. We'll go from left to right along this row until we find a value higher than 3 - our chi square value. The first one we encounter is 3.84. Looking to the top of this column, we see that the corresponding p value is 0.05. This means that our p value is between 0.05 and 0.1 (the next-biggest p value on the table).
7
See AlsoUsing P-values to make conclusions (article) | Khan AcademyUnderstanding P-Values and Statistical Significancep-value Calculator | Formula | InterpretationP-Value: What It Is, How to Calculate It, and Why It MattersDecide whether to reject or keep your null hypothesis. Since you have found an approximate p value for your experiment, you can decide whether or not to reject the null hypothesis of your experiment (as a reminder, this is the hypothesis that the experimental variables you manipulated did not affect the results you observed.) If your p value is lower than your significance value, congratulations - you've shown that your experimental results would be highly unlikely to occur if there was no real connection between the variables you manipulated and the effect you observed. If your p value is higher than your significance value, you can't confidently make that claim.[9]
- Example: Our p value is between 0.05 and 0.1 . It is not smaller than 0.05, so, unfortunately, we can't reject our null hypothesis. This means that we didn't reach the criterion we decided upon to be able to say that our town's police give tickets to red and blue cars at a rate that's significantly different than the national average.
- In other words, random sampling from the national data would produce a result 10 tickets off from the national average 5-10% of the time. Since we were looking for this percentage to be less than 5%, we can't say that we're sure our town's police are less biased towards red cars.
Advertisem*nt
Expert Q&A
Search
Question
How do you explain what a confidence interval means?
Mario Banuelos, PhD
Associate Professor of MathematicsMario Banuelos is an Associate Professor of Mathematics at California State University, Fresno. With over eight years of teaching experience, Mario specializes in mathematical biology, optimization, statistical models for genome evolution, and data science. Mario holds a BA in Mathematics from California State University, Fresno, and a Ph.D. in Applied Mathematics from the University of California, Merced. Mario has taught at both the high school and collegiate levels.
Mario Banuelos, PhD
Associate Professor of Mathematics
Expert Answer
A confidence interval, you can think of this as kind of a net, a net that captures the potential region where a population parameter lies. So in general, you calculate confidence intervals by taking the point estimate, and adding and subtracting the margin of error. For proportions, this looks like taking the sample proportion, so if you had 6 out of 10, people answer yes on a particular question, then your sample proportion is 60%. So for proportions, you would take the sample proportion of your data, and you add or subtract the margin of error. For numerical data, it's gonna work very similarly, where you take the sample statistic, and you add or subtract the margin of error. For numerical data, you take the sample mean, and you add or subtract the margin of error, the margin of error is going to determine how confident you are in where you believe that population parameter lies. If we're talking about the number of hours students spend online, then you could ask a sample of 100 students and find out how many hours on average they spend online, but confidence intervals allow you to generalize that calculation by giving some margin of error, basically.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 0Helpful 1
Question
Is it correct to say that p values of less than 5 percent tell us that observed results are due to chance variation?
Sam Bennett
Community Answer
A p-value of 0.05 tells us that if we were conduct the test, there would be a 5% chance that the null hypothesis stands. It is a measure of helping us prevent a type II error, or falsely rejecting the null hypothesis. Assuming that you meant that the "observed results" is a part of the null hypothesis (Ha), then yes, it is correct to say that p-values of less than 5 percent tell us that the observed results are due to chance variation.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 33Helpful 13
Question
How do I convert 140% into a reduced fraction?
Community Answer
First make it into a fraction, 140 is equal to 1 and 4/10, then divide the numerator and denominator (4 and 10) by their HCF, which is two, giving you an answer of 1 2/5.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 52Helpful 20
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Advertisem*nt
Video
Tips
A scientific calculator will make the computation far easier. You can also find calculators online.
Thanks
Helpful75Not Helpful42
You can calculate p-value using several computer programs, including commonly-used spreadsheet software, and more specialized statistical software.
Thanks
Helpful64Not Helpful41
Submit a Tip
All tip submissions are carefully reviewed before being published
Submit
Thanks for submitting a tip for review!
Advertisem*nt
You Might Also Like
Advertisem*nt
References
- ↑ https://sphweb.bumc.bu.edu/otlt/mph-modules/bs/bs704_hypothesistesting-chisquare/bs704_hypothesistesting-chisquare_print.html
- ↑ https://sphweb.bumc.bu.edu/otlt/mph-modules/bs/bs704_hypothesistesting-chisquare/bs704_hypothesistesting-chisquare_print.html
- ↑ https://www.omnicalculator.com/statistics/p-value
- ↑ https://online.stat.psu.edu/statprogram/reviews/statistical-concepts/chi-square-tests
- ↑ https://online.stat.psu.edu/statprogram/reviews/statistical-concepts/hypothesis-testing/p-value-approach
- ↑ https://www.ncbi.nlm.nih.gov/pubmed/18582619
- ↑ http://www.radford.edu/rsheehy/Gen_flash/Tutorials/Chi-Square_tutorial/x2-tut.htm
- ↑ https://passel2.unl.edu/view/lesson/9beaa382bf7e/8
- ↑ https://www.omnicalculator.com/statistics/p-value
About This Article
![How to Calculate P Value: 7 Steps (with Pictures) - wikiHow (30) How to Calculate P Value: 7 Steps (with Pictures) - wikiHow (30)](https://i0.wp.com/www.wikihow.com/images/thumb/0/0f/Mario_Banuelos2.png/-crop-100-100-100px-Mario_Banuelos2.png)
Co-authored by:
Mario Banuelos, PhD
Associate Professor of Mathematics
This article was co-authored by Mario Banuelos, PhD. Mario Banuelos is an Associate Professor of Mathematics at California State University, Fresno. With over eight years of teaching experience, Mario specializes in mathematical biology, optimization, statistical models for genome evolution, and data science. Mario holds a BA in Mathematics from California State University, Fresno, and a Ph.D. in Applied Mathematics from the University of California, Merced. Mario has taught at both the high school and collegiate levels. This article has been viewed 2,311,277 times.
3 votes - 80%
Co-authors: 30
Updated: March 3, 2024
Views:2,311,277
Categories: Probability and Statistics
Article SummaryX
To calculate p value, compare your experiment's expected results to the observed results. Calculating p value helps you determine whether or not the results of your experiment are within a normal range. After you find the approximate p value for your experiment, you can decide whether you should reject or keep your null hypothesis. If the p value is below a certain predetermined amount (like, for instance, 0.05), you would want to reject the null hypothesis of the experiment.
Did this summary help you?
In other languages
Spanish
Russian
French
Chinese
Dutch
German
Portuguese
Indonesian
Arabic
Korean
Turkish
- Send fan mail to authors
Thanks to all authors for creating a page that has been read 2,311,277 times.
Reader Success Stories
Mallikarjuna Reddy Nune
Jul 24, 2018
"I stated with data science tutorial and I came across this term p-value, was referred by udemy tutorial to look..." more
More reader storiesHide reader stories
Did this article help you?
Advertisem*nt